DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.

- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50

The Logic rim uses a wider 35mm profile with a thick sidewall, which makes the rim strong and resilient to sideways impacts that can happen from anything between under-rotating a flair or over-rotating a hard 360 out of a rail. - Very strong reinforced spoke hole design - Extra-thick sidewalls to resist denting under harsh conditions

PRODUCT SPECS: - Size: 26?, 27.5" (sleeved only) , 29? - Outside Width: 25mm - Inner bead width: 20.3mm - Section Height: 19mm - Weight: 26?- 448g, 27.5"-495g, 29?- 527g - Type: Sleeved or Welded - Brake Compatibility: Disc Only - Hole Count: 28, 32

Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Product specs: - Size:24", 26", 29" - Width:33.5 - Bead width: 33.5mm - Inner bead width: 26mm - Section height: 25.5mm - Weight (26"): 660g - Sleeved or welded - Hole count: 32, 36

- Straight gauge stainless steel, bag of 36, includes 14g silver nipples - 281mm lengths are for most high-flange track hubs and velocity deep V rims - 308mm spokes are designed to be cut and re-threaded for desired length

Big Deal spoke nipple washers are not required for tubeless set up. When used, they eliminated the need for tubeless tape.

Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only

Sta Tru Rear Wheel - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 16-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 305 / 16-inch - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - This axle is compatible with bikes that have a Cervelo R.A.T. thru-axle in the fork with 100 x 12mm front hubs. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer the highest quality, simple, lightweight alternative to that bulky handle. - This axle is compatible with bikes that have a Focus R.A.T. thru-axle in the fork with 100 x 12mm front hubs. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows to fully tighten the axle and to perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Removable, plug-in lever design is streamlined and protects your RWS lever - Thread pitch: 12 x 1.5mm - Length: 121mm

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Removable, plug-in lever design is streamlined and protects your RWS lever - Thread Pitch: 12 x 1.0mm

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Removable, plug-in lever design is streamlined and protects your RWS lever

Upgrade or refresh your bike. - Original replacement wheel - Does not include skewer, reflector, rim strip, valve, or owner's manual

Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

Champion 2.0 Black Spokes - One 264mm spoke = 7g

Make it more aerodynamic – this nipple is hidden inside the rim. DT Hidden Nipples are designed for high-profile rims, in which the inverted design is essential for optimum precision. They are very light and hidden on the inside of the rim: perfectly suited for high aero wheels. The nipples will align perfectly due to their spherical contact surface. - Weight: 22g for 64 nipples

- Proof that white powdercoated spokes don't have to cost a fortune - Straight gauge steel, durable coating resists scratches - Box of 100, includes 14g black brass nipples

PRODUCT SPECS: - Size: 26?, 27.5" (sleeved only), 29? - Outside Width: 27mm - Inner bead width: 22.3mm - Section Height: 20mm - Weight: 26?- 482g, 27.5"-515g, 29?- 547g - Type: Sleeved or Welded - Brake Compatibility: Disc Only - Hole Count: 32

Product specs: - Size: 26?, 27.5" (sleeved only) - Outside width: 29mm - Inner bead width: 23.4mm - Section height: 21mm - Weight: 26?- 520g, 27.5"-562g - Type: sleeved or welded - Brake compatibility: disc only - Hole count: 32