You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 73D Stem offers 17-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 73/17 degree - Stack: 45mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Blatte finish - 121g (110mm)

You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)

When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.

Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?". From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours. Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. - Forged and Fully CNC machined from AL6061 – T6 Aluminium - Stainless Steel Hardware - Available lengths - 35mm, 42.5mm and 50mm - Available in both 31.8mm (Black only) and 35mm Clamp - Weight: 35mm 138g, 42.5mm 152g, 50mm 160g

Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes

TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.

The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM's Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that's designed to be aerodynamically efficient by blending into the stem body. Available in six sizes, ranging from 90 to 140mm, to meet any rider's fit needs. - Updated distinctive Zipp cosmetics - Carbon Exogram construction delivers the stiffest stem on the market gram for gram. - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated computer mount available separately

The BrickTop alloy stem is a classic style, top-mount BMX stem with a 4-bolt handlebar clamp.

This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.

Tom Dugan's signature DGN v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)

- Solution for riders wanting to raise their drop bars for added comfort - 225mm tall quill (210mm above the min insertion line) - Forged aluminum - 22.2mm quill - 25.4mm clamp - 386-415g

An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm

The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)

eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm

Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point. - Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Machined logo on bar clamp

• Forged aluminum • Classic streamlined shape • 2-bolt clamp • 180mm tall

MSW 25° stems raise the bar—literally—for what riders can expect from an unassuming stem. Available in lengths from 60-110mm for custom fitting. Rigorously tested to ISO-4210 Mountain qualification standards. - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation - Bead blasted & anodized black finish

Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars. - Finish: Black Ano - Weight: 130g (100mm) - Rise: Varies - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm - Materials: EA90 alloy

A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications. - Blind bolt holes and shaping - Cold-forged and precision-machined - No-gap face plate and clamp area - Stainless hardware

Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation

- Unique style, modern geometry, and rock solid construction, without the heavy price tag - Suitable for all disciplines: Freeride, All Mountain, Enduro - Chamfered bar-clamps to reduce stress risers and increase fatigue life in handlebars - Ideal for shorter riders to improve the setup of their cockpit. - Length (mm): 40 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±170 - Finish: Shot peen anodized, laser logos

Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately

FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon. - Stack Height: 41mm - Weight: 126g (100mm)

FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged face plate - Chromoly hardware - ±6° - 31.8mm handlebar clamp diameter - 35mm fork clamp stack height - 127 grams (100mm)

- Full UD carbon construction stem - 4 bolt aluminum faceplate for added rigidity - Stainless steel hardware - Reversible +/-7° angle - 40mm stack height - 125g weight in 100mm length - ISO-Road safety certified

The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US-sourced 2024 aircraft alloy. - Stack height: 36mm - Weight: 155g (90mm)

Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt

- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, DJ, E-Bike

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

A Blendr-ready stem at home on the road or mountain bike The Bontrager Comp 31.8 stem is Blendr ready and provides a secure and confident connection to 31.8 handlebars for road, city, and mountain bikes. Key features - 6061-T6 cast body construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp with M5 corrosion resistant steel bolts - Blendr ready for seamless accessory integration - Compatible with Blendr Elite bases and Blendr mounts - Suitable for use on a road, city, or mountain bike - Safe for use on carbon steerer tubes and handlebars